All Machinery

The BMF18T1 is the largest and most powerful model in the BMF trailer range. With an 18-tonne payload and a generous 3.5–4 m² loading area, this flagship trailer is built to move large quantities of timber efficiently between sites.

Designed for demanding professional use, the BMF18T1 delivers maximum capacity and strong performance for high-output forestry work. It can be equipped with the following crane models: BMF800HD, BMF800HD+, BMF1000HD, and BMF1000HD+.

The BMF17T2 is a two-beam timber trailer with a payload of up to 17 tonnes, built for high-output forestry work and quick moves between logging sites. As one of the largest models in the BMF range, it’s designed to carry heavy loads consistently and reliably.

This model comes with FD support legs and is one of only two platform trailers in the BMF range (alongside the BMF6T2). Its frame uses a closed construction for extra strength, and the top plates are made from wear-resistant Hardox steel supplied by Swedish steel producer SSAB for long-lasting durability in tough conditions.

The BMF17T2 can be paired with a wide selection of BMF cranes: BMF750(HP), BMF850(HP), BMF905(HP), BMF800HD, BMF800HD+, BMF1000HD, and BMF1000HD+.

The BMF16T1 is a one-beam forestry trailer built for demanding workloads, with a payload of up to 16 tonnes. One of the largest models in the BMF range, it’s designed to move large log stacks efficiently so you can keep work flowing and stay on schedule.

The BMF16T1 is available with FD support legs and is compatible with BMF750(HP), BMF850(HP), BMF905(HP), and BMF800HD crane models.

The BMF14T2 is a two-beam forestry trailer with a payload of up to 14 tonnes, built for professional forestry and equally useful for demanding agricultural work. Made with special steel, it stays tough yet lightweight, helping you handle heavy timber loads without unnecessary bulk.

It’s available with A-type or FD-type support legs, and features a turning drawbar that houses a securely protected oil pump inside. The BMF14T2 can be combined with BMF650, BMF720, BMF750(HP), BMF850(HP), and BMF905(HP) crane models.

The BMF13T1 is a single-beam forestry trailer with a payload of up to 13 tonnes, built for professional forestry and designed to handle bulkier loads with confidence. As part of the Pro-series, it delivers the strength and capability needed for demanding, day-to-day timber work.

The BMF13T1 can be combined with the following BMF crane models: BMF650, BMF720, BMF750(HP), BMF850(HP), and BMF905(HP).

The BMF12T2 is a two-beam forestry trailer with a payload of up to 12 tonnes, built for serious forestry work where strength, stability, and long service life matter. It’s engineered to stay strong yet light, using premium steels and a reinforced frame design.

The loading beams are made from Strenx steel supplied by Swedish manufacturer SSAB, while the main load-bearing frame uses two 200 × 100 mm pipes with an increased 8 mm wall thickness for added rigidity. A uniquely designed drawbar protects the oil pump, which is hidden inside it, and the trailer is powder-coated to resist wear and improve corrosion protection. FD-type support leg cylinders are also securely protected.

For stability, the support legs and crane mount directly to the trailer frame (not under the crane), and the lowered crane position improves the centre of gravity—especially helpful on uneven ground. The BMF12T2 is available with A-type or FD-type support legs, and you can choose standard, hybrid, or Pro bolsters. These bolster options let you extend the poles to widen the load area and move bolsters along the beam to suit different load lengths and setups.

Compatible with BMF650, BMF720, BMF750(HP), BMF850(HP), and BMF905(HP) cranes.

The BMF11T1Pro is a single-beam forestry trailer with a load capacity of up to 11 tonnes, built for demanding forestry work with a focus on strength, stability, and smart protection. Its loading beams are made from Strenx steel supplied by Swedish manufacturer SSAB, supporting a tough, long-lasting build.

A standout feature is the uniquely designed drawbar that fully protects the oil pump, which is hidden inside it. The FD-type support leg cylinders are also securely protected for added durability in rough conditions. For better handling and stability, the trailer has a lowered crane position to improve the centre of gravity, and the frame is powder-coated to resist wear and corrosion.

The Pro setup includes a movable bolster set with extendable bolsters, allowing you to adjust bolster positions along the beam and widen the load area when needed. The toothed bolster edges help keep logs from sliding during transport. BMF also offers a wide range of accessories, including work lights, winches, platforms, and brake system options.

The BMF10T2 is a two-beam forestry trailer with a payload of up to 10 tonnes (10,000 kg), built for demanding forestry work. Known for its tough build and clean, professional look, it’s a strong choice for operators who need capability, reliability, and a refined finish in one machine.

You can configure the BMF10T2 with standard, pro, or hybrid bolsters, and choose between A-type or FD-type support legs to match your working setup. It can be paired with a wide range of BMF log cranes: BMF650, BMF720, BMF750(HP), and BMF850(HP).

The BMF9T1 is a one-beam forestry trailer with a 9-tonne payload, built for semi-professional and professional forestry. It offers a strong price-performance balance, with a robust setup designed for reliable, everyday timber handling.

Its support legs sit beneath the crane, helping keep the trailer stable and well balanced. The crane can also be used with a 3-point connection, giving you more flexibility depending on how you prefer to work. The BMF9T1 can be paired with either the BMF650 or BMF720 crane models.

The BMF8T2 is a two-beam forestry trailer with a payload of up to 8 tonnes (8000 kg). Designed as a versatile option for private forest owners, it’s also strong and capable enough for professional use when you need a compact but hardworking setup.

The BMF8T2 is compatible with BMF650 and BMF720 crane models, and it’s available with either A-type or FD support legs to suit your preferred configuration.