All Machinery

The BMF11T1Pro is a single-beam forestry trailer with a load capacity of up to 11 tonnes, built for demanding forestry work with a focus on strength, stability, and smart protection. Its loading beams are made from Strenx steel supplied by Swedish manufacturer SSAB, supporting a tough, long-lasting build.

A standout feature is the uniquely designed drawbar that fully protects the oil pump, which is hidden inside it. The FD-type support leg cylinders are also securely protected for added durability in rough conditions. For better handling and stability, the trailer has a lowered crane position to improve the centre of gravity, and the frame is powder-coated to resist wear and corrosion.

The Pro setup includes a movable bolster set with extendable bolsters, allowing you to adjust bolster positions along the beam and widen the load area when needed. The toothed bolster edges help keep logs from sliding during transport. BMF also offers a wide range of accessories, including work lights, winches, platforms, and brake system options.

The BMF12T2 is a two-beam forestry trailer with a payload of up to 12 tonnes, built for serious forestry work where strength, stability, and long service life matter. It’s engineered to stay strong yet light, using premium steels and a reinforced frame design.

The loading beams are made from Strenx steel supplied by Swedish manufacturer SSAB, while the main load-bearing frame uses two 200 × 100 mm pipes with an increased 8 mm wall thickness for added rigidity. A uniquely designed drawbar protects the oil pump, which is hidden inside it, and the trailer is powder-coated to resist wear and improve corrosion protection. FD-type support leg cylinders are also securely protected.

For stability, the support legs and crane mount directly to the trailer frame (not under the crane), and the lowered crane position improves the centre of gravity—especially helpful on uneven ground. The BMF12T2 is available with A-type or FD-type support legs, and you can choose standard, hybrid, or Pro bolsters. These bolster options let you extend the poles to widen the load area and move bolsters along the beam to suit different load lengths and setups.

Compatible with BMF650, BMF720, BMF750(HP), BMF850(HP), and BMF905(HP) cranes.

The BMF13T1 is a single-beam forestry trailer with a payload of up to 13 tonnes, built for professional forestry and designed to handle bulkier loads with confidence. As part of the Pro-series, it delivers the strength and capability needed for demanding, day-to-day timber work.

The BMF13T1 can be combined with the following BMF crane models: BMF650, BMF720, BMF750(HP), BMF850(HP), and BMF905(HP).

The BMF14T2 is a two-beam forestry trailer with a payload of up to 14 tonnes, built for professional forestry and equally useful for demanding agricultural work. Made with special steel, it stays tough yet lightweight, helping you handle heavy timber loads without unnecessary bulk.

It’s available with A-type or FD-type support legs, and features a turning drawbar that houses a securely protected oil pump inside. The BMF14T2 can be combined with BMF650, BMF720, BMF750(HP), BMF850(HP), and BMF905(HP) crane models.

The BMF16T1 is a one-beam forestry trailer built for demanding workloads, with a payload of up to 16 tonnes. One of the largest models in the BMF range, it’s designed to move large log stacks efficiently so you can keep work flowing and stay on schedule.

The BMF16T1 is available with FD support legs and is compatible with BMF750(HP), BMF850(HP), BMF905(HP), and BMF800HD crane models.

The BMF17T2 is a two-beam timber trailer with a payload of up to 17 tonnes, built for high-output forestry work and quick moves between logging sites. As one of the largest models in the BMF range, it’s designed to carry heavy loads consistently and reliably.

This model comes with FD support legs and is one of only two platform trailers in the BMF range (alongside the BMF6T2). Its frame uses a closed construction for extra strength, and the top plates are made from wear-resistant Hardox steel supplied by Swedish steel producer SSAB for long-lasting durability in tough conditions.

The BMF17T2 can be paired with a wide selection of BMF cranes: BMF750(HP), BMF850(HP), BMF905(HP), BMF800HD, BMF800HD+, BMF1000HD, and BMF1000HD+.

The BMF18T1 is the largest and most powerful model in the BMF trailer range. With an 18-tonne payload and a generous 3.5–4 m² loading area, this flagship trailer is built to move large quantities of timber efficiently between sites.

Designed for demanding professional use, the BMF18T1 delivers maximum capacity and strong performance for high-output forestry work. It can be equipped with the following crane models: BMF800HD, BMF800HD+, BMF1000HD, and BMF1000HD+.

The BMF430 is the smallest and lightest crane in the BMF range, built for smaller forests and everyday farm or woodland work. With a total reach of 4.3 metres, it delivers a strong price-performance balance without compromising on durability.

It features a three-point connection, wide-angle linkage system, and protected hydraulics for smooth, reliable operation. Built using tough steel and carrying the My Inner Strenx® quality mark, the BMF430 is made to handle demanding conditions. It’s also compatible with BMF6T2 and BMF7T1 trailers for easy setup and transport.

The BMF540 is a compact, sturdy forestry crane built for reliable performance across a wide range of tasks. With a single telescope extending the boom, it delivers a total reach of up to 5.4 metres, giving you strong capability without needing a large setup.

It includes a wide-angle linkage system and a three-point connection (with support leg) for stable, controlled handling. Like all BMF cranes, it’s thoroughly tested and designed for long service life, with protected hydraulics, durable turning house and column, a powder-coated finish, and easy-access greasing points. The boom is made from SSAB Strenx steel and carries the My Inner Strenx® mark. Compatible with BMF6T2 and BMF7T1 trailers, and customisable with a wide range of accessories.

The BMF650 is a popular, versatile timber crane with a telescope boom and a maximum reach of 6.5 metres. Favoured by farmers, it’s built to handle everything from light firewood to heavier logs, making it a strong all-rounder for day-to-day lifting.

It features a three-point connection (with support leg) so it can be attached to a tractor, plus a thoroughly tested design with a robust turning house, powder-coated finish, easy greasing points, and protected hydraulics for long service life. The boom is made from SSAB Strenx steel and carries the My Inner Strenx® mark. A wide range of accessories is available, including colour options to match your tractor.

Compatible with these trailers: BMF8T1E, BMF8T2, BMF9T1, BMF10T2, BMF11T1, BMF12T2, BMF13T1, BMF14T2.